LaskaKit ESPD-35 ESP32 3.5 TFT ILI9488 Touch, used
Code: X100131
Product detailed description
We have a few ePaper of different types left, hence "used" and for a symbolic amount.
Don't need a low-power board, but appreciate an active TFT display with a great viewing angle and quick connection of additional sensors and modules? ESPD-3.5". Although it is a development kit, it is also suitable for incorporation into the final product. The plate has 4 mounting holes.
3.the 5" display has a resolution of 480x320 px and the number of colours of each pixel can be up to 65535, and it also has a touch ESPD-3.5" includes a microSD card slot where you can store a lot of pictures and icons - you can find instructions on how to do it here.
In addition to the SD card slot, the board has an ESP32 module supporting Wi-Fi and Bluetooth connectivity, a built-in programmer with CH9102, a charging circuit for a battery with a charging current of 400mA, 2x uŠup connectors for connecting sensors (e.g. SHT40 - temperature/humidity, SCD41- CO2/temperature/humidity or BME280 - pressure/temperature/humidity).
The ESPD3.5" contains two buttons - RESET and Power ON/OFF - the button that turns the ESPD3.5" off (long press) and on (short press). The button is connected to GPIO35. You might also appreciate the 2x13 pin cavity rail, where we connected the remaining GPIO ESP32.
The USB-C connector is used for both programming and charging the Lipolka. We also left a place for a 580mAh Lipol battery on the board - so it wouldn't get in the way anywhere else.
To measure the battery voltage, we also fitted a voltage divider connected to the battery and GPIO34 - don't forget to power the solder bridge.
Specifications (We are preparing):
| Version on sale | v1.0 PCB version, without connector, see photo. Max TFT SPI frequency 20MHz |
| ESP32 module | ESP32-WROOM-32 16MB PCB |
| Input voltage | 3.7-8V |
| Digital I/O Pins | 32 |
| Analog Inputs | 16 |
| USB converter | CH9102 |
| Dimensions | |
| Length | 99mm |
| Width | 55mm |
| Height | approx 11mm |
| Weight | approx. 60g |
Delivery components:
- 1pcs LaskaKit ESPD-35 ESP32 3.5 TFT ILI9488 Touch, used
Note:
- This product is not a standalone functional unit and may require professional installation.
- Product images are for illustration purposes only and may sometimes differ from the actual appearance of the item. However, this does not change its basic properties.
- Battery is not included.
Additional parameters
| Category: | Component Marketplace & Refurbished Goods |
|---|---|
| Warranty: | 2 years |
| Weight: | 0.01 kg |
| Type: | ESP |
| Logical levels: | 3.3V |
| I/O pins: | 12 |
| PWM pins: | 12 |
| ADC pins: | 12 |
| Frequency: | 40MHz |
| Flash memory: | 4MB, 16MB |
| SRAM memory: | 520kB |
| EEPROM memory: | Ne |
| Connector with battery charger: | Yes |
| Microcontroller: | ESP32 |
| Converter: | CH9102 |
| Bluetooth: | Yes |
| WiFi: | Yes |
| The item has been sold out… | |
Be the first who will post an article to this item!
Be the first who will post an article to this item!