1.28" 240x240 TFT IPS round colour display GC9A01, round PCB, SPI
Code: LA141051Free Shipping
From 100 EUR
30 Days to Return
For Registered

30 Days to Return
For Registered Customers

Free Shipping
For orders from 100 EUR

Customer Care
We handle complaints within 5 days

Quick dispatch
Within 24 hours
Product detailed description
A round colour LCD display with a 1.28" diagonal and 240 × 240 px resolution utilises the GC9A01 controller and an IPS panel, offering faithful colours and a clear image from practically any angle. The display is mounted on a round PCB with a pin header, meaning the board shape mirrors the display area, allowing the module to be easily integrated into smartwatches, alarm clocks, tachometers, panel gauges, or decorative projects. Communication takes place via a four-wire SPI bus, meaning only a few wires are needed to connect it to an Arduino, ESP32, or Raspberry Pi.
Specifications:
- Display type: IPS TFT LCD, round, normally black
- Controller: GC9A01
- Diagonal: 1.28"
- Resolution: 240 (H) RGB × 240 (V) px
- Pixel pitch: 0.135 × 0.135 mm
- Sub-pixel arrangement: RGB vertical stripe
- Colour depth: 65 536 colours (RGB565, 16-bit)
- Brightness: 400 cd/m² (typ.)
- Viewing angle: IPS, omnidirectional (All View)
- Interface: SPI, 4-wire
- Power supply: 3.3 V DC (LDO XC6206P332MR is on the board, VCC supports up to 5 V)
- Logic Level: 3.3 V (use a level shifter for 5V boards)
- Backlight: 2× white LEDs in parallel, always on (no separate BL pin)
- Pins: 7, 2.54 mm pitch
- VCC: power supply
- GND: ground
- SCL: SPI clock signal
- SDA: SPI data input/output
- DC: data/command select
- CS: chip select (active Low)
- RES (RST): reset, active Low
- Dimensions:
- PCB: 38 × 45.5 mm (round part Ø 38 mm with pin header)
- Active display area: Ø 32.4 mm
- Backlit area: Ø 35.6 mm
- Total thickness: approx. 11.5 mm (including pin header)
- PCB thickness: 1.6 mm
- Mounting holes: 2× Ø 2.0 mm
- Touch layer: no (display is not touch-enabled)
- Compatibility: Arduino, ESP32, ESP8266, STM32, Raspberry Pi, Raspberry Pi Pico
- Recommended libraries: TFT_eSPI, LovyanGFX, Adafruit GFX + GC9A01A, LVGL
- Operating temperature: −20 °C to +70 °C
- Storage temperature: −30 °C to +80 °C


Package contents:
- 1× round TFT IPS display 1.28" 240 × 240 px (GC9A01, SPI)
Note:
- This product is not a standalone functional unit and may require professional installation.
- Product images are for illustration purposes only and may sometimes differ from the actual appearance of the item. However, this does not change their basic properties.
Additional parameters
| Category: | TFT LCD Displays |
|---|---|
| Warranty: | 2 years |
| Weight: | 0.016 kg |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
