News

The insulated 2 mm banana socket is mounted into a 6 mm hole in the front panel of a power supply, measuring instrument, or test fixture.

This gold-plated 4 mm banana plug with a plastic cover connects to a conductor without soldering – the conductor is secured by a small screw in the plug body.

The nickel-plated 4 mm pistol-grip banana plug connects to a conductor without soldering using a screw.

The JXZ-2 4 mm banana socket is mounted into an 8 mm panel hole and features an M4 screw at the rear for solderless wire connection.

The JXZ-2 4 mm banana socket is mounted into a 10 mm panel hole and features an M4 screw at the rear for solderless wire connection.

The JXZ-2 4 mm banana plug socket is mounted in a 12 mm panel hole and features an M4 screw at the rear for solderless wire connection.

The 4 mm banana plug socket with an extended rear terminal is designed for mounting into instrument panels, power supplies, or test fixtures.

The insulated 4 mm banana socket is designed for installation into a 12 mm hole in the front panel of a power supply, measuring instrument, or test fixture.

The insulated 4 mm banana socket is mounted into an 8 mm hole in the front panel of a power supply, measuring instrument, or test fixture.

The 4 mm safety banana plug with lever terminal and retractable insulating cover is designed for measuring and laboratory wires where the metal pin should remain covered during...

The 4 mm safety banana plug with an insulating sleeve around the pin is designed for measuring and laboratory leads where you want to avoid exposing the metal pin during...

This measurement-grade N female – SMA male coaxial adapter is designed for the precise connection of instruments, cables and antennas with N connectors to devices and modules...

The gold-plated 2 mm banana plug with an insulating sleeve is designed for thin measuring wires and jumpers for devices with 2 mm sockets.

The binding post with a 4 mm banana socket serves as an output terminal for laboratory power supplies, chargers, or test fixtures.

The BNC to SMA coaxial adapter is used to connect BNC-connector devices, such as oscilloscopes, generators or counters, with cables, antennas and modules with an SMA connector...

Good Display GDEH0576T81 e-Paper display with a 5.76" diagonal, 920×680 resolution, SPI interface, and E Ink Carta HD panel for a sharp monochrome image.

Good Display GDEB0709E01 e-paper display with a 7.09" diagonal, 1600×1200 pixel resolution, SPI interface, and E Ink Spectra 6 technology, which displays six colours: black,...

Good Display GDEP100E01 electronic paper display with a 10" diagonal, 1600×1200 pixel resolution, TTL interface and E Ink Spectra 6 technology, displaying six colours – black,...

The grounding terminal with a 4 mm banana socket and M10 screw is designed for grounding and power connections with currents up to 100 A.

The VL53L0X laser distance sensor from STMicroelectronics is a compact Time-of-Flight (ToF) sensor with an I2C interface.

The low noise amplifier (LNA) for the 50 MHz to 6 GHz band, featuring a gain of 20 dB and a typical noise figure of 0.6 dB, is designed to amplify weak signals from an antenna...

Conical neodymium magnet in blue, 16 mm in diameter and 20 mm in height, with a load capacity of up to 2 kg.

The Raspberry Pi Compute Module 4S is a compute module featuring a quad-core Broadcom BCM2711 processor (the same as in the Raspberry Pi 4B) in a 200-pin SO-DIMM form factor,...

The gold-plated RP-SMA – SMA coaxial adapter is used to connect an antenna with an SMA connector to a Wi-Fi router with RP-SMA, or conversely, a Wi-Fi antenna to a module or...