1212ZJ Aluminium Articulated Wall And Ceiling Mount - With 1/4"-20 UNC Thread, Concealed Cable Management, Black

Product detailed description

The Universal Articulated Bracket 1212ZJ is cast from aluminium alloy, meaning it can support significantly more than standard plastic brackets and does not degrade in sunlight or frost. It can be used anywhere you need to firmly attach equipment to a wall or ceiling while adjusting the direction: small solar panels, outdoor sensors, security cameras, antennas, lights, or custom IoT boxes. The tilting joint with a screw allows you to fine-tune the incline, for example, to ensure a panel faces south, and reliably maintains the position once tightened. Both the arm and the base are hollow, allowing cables to run through the entire bracket so that no wiring remains visible on the facade. The mounting plate features a standard 1/4"-20 UNC photographic thread, which is found on most cameras, tripod adapters, and panel mounts.

Specifications:

• Model: 1212ZJ (packaging also marked 1212C/D)
• Type: articulated bracket for wall and ceiling mounting
• Material: die-cast aluminium alloy, matte black finish
• Recommended load: up to 2 kg
• Equipment attachment: plate with 1/4"-20 UNC thread and longitudinal slot for position fine-tuning
• Extension: 160 mm (from wall to joint)
• Weight: 147 g (complete package including mounting material)
• Adjustment:
  • Joint: tilting and locking via Philips head screw
  • Base: oval flange with 4 holes; can be mounted horizontally or vertically by rotating
• Cable routing: internal, through the arm and base (cable is not visible)
• Base holes: 4× for 4 × 25 mm screws
• Use: indoor and outdoor
• Colour: black

Typical applications:

• small solar panels and photovoltaic cells – adjustment of tilt and azimuth
• outdoor sensors (temperature, humidity, air quality, lighting, precipitation)
• security and IP cameras with 1/4" thread
• antennas, LoRa/GSM modules, and custom IoT boxes
• lights, spotlights, and speakers

Package contents:

• 1× 1212ZJ bracket
• 2× 1/4"-20 UNC screws
• 4× plastic wall plug
• 4× self-tapping screw 4 × 25 mm with countersunk head
• 2× joint cover
• 1× mounting template 70 × 100 mm

Note:

• Do not use aggressive cleaning agents for cleaning, as they could damage the surface finish.
• The substrate must be able to support several times the weight of the mounted device. Use the included wall plugs for masonry; for other materials, choose appropriate anchoring.
• This product is not a standalone functional unit and may require professional installation.
• Product images are for illustrative purposes only and may sometimes differ from the actual appearance of the item. However, this does not change their basic properties.