Intelligent RGB LED NeoPixel ring, WS2812B, 5050, 5V

Product detailed description

A ring of WS2812B smart RGB LEDs (NeoPixel), allowing you to set the colour and brightness of each LED individually. Each LED has a built-in driver, so the entire ring is controlled by a single data line from one digital pin of an Arduino, ESP32, or Raspberry Pi Pico. Thanks to the DO output, you can daisy-chain the rings or combine them into concentric circles. Ideal for light indicators, clocks, effect lighting, status LEDs, or decorations. The ring is available in five sizes, depending on the number of LEDs and the diameter.

Specifications:

• LED Type: WS2812B, 5050 (NeoPixel, integrated driver in each LED)
• Power Supply: 5V DC
• Control: digital, 1 data line
• Protocol: 24 bits per LED (3× 8-bit RGB)
• Connections: 4 (VCC, GND, DI – data input, DO – data output)
• Current draw per LED: max. 3× 20 mA (RGB), approx. 1 mA idle
• Chainable: yes (using DO output)
• Compatibility: Arduino, ESP32, ESP8266, Raspberry Pi Pico (recommended libraries: Adafruit NeoPixel, FastLED)
• Variants:
  • 7 LED: outer diameter 23 mm, max. current: up to 0.42 A
  • 12 LED: outer diameter 37 mm, max. current: up to 0.72 A
  • 16 LED: outer diameter 68 mm, max. current: up to 0.96 A
  • 24 LED, Ø65 mm: outer diameter 65.9 mm, inner diameter 54.15 mm, max. current: up to 1.44 A
  • 24 LED, Ø85 mm: outer diameter 85 mm, max. current: up to 1.44 A

Package contents:

• 1× RGB LED NeoPixel ring WS2812B (depending on the selected variant)

Note:

• This product is not a standalone functional unit and may require professional installation.
• Product images are for illustrative purposes only and may sometimes differ from the actual appearance of the item. However, this does not change their basic properties.