Bluetooth Audio Module AP50H, 2x50W
Code: LA230049Free Shipping
From 100 EUR
30 Days to Return
For Registered

30 Days to Return
For Registered Customers

Free Shipping
For orders from 100 EUR

Customer Care
We handle complaints within 5 days

Quick dispatch
Within 24 hours
Product detailed description
The Bluetooth audio module with 2x50W amplifier has functions such as USB sound card or U-Disk (playing audio files from USB flash memory). The standard USB-C connector is used for this. It also has an audio input, when you connect an external audio device using the 3.5mm stero jack, it automatically switches to this signal source. The module also allows the connection of headphones or an external audio amplifier. A second 3.5mm stereo jack on the board is used for this purpose.
The module is also equipped with a control rotary encoder with a button. Rotate the rotary pushbutton to change the volume and a short press to start/stop playback. A long press switches the module on/off.
The module cannot be powered via USB.
Specifications:
- amplifier chip: TPA3116D2 50W+50W
- Operating voltage 5-27V/2A (12-24V recommended)
- Bluetooth version 5.0
- Output power:
- 2x10W = 12V/8Ω
- 2x20W = 18V/8Ω
- 2x30W = 22V/8Ω
- 2x20W = 12V/4Ω
- 2x40W = 18V/4Ω
- 2x50W = 21V/4Ω
- 2x10W = 12V/8Ω
- Dimensions: 60x60x16mm
Included in delivery:
- 1pc Bluetooth Audio Module AP50H, 2x50W
Notes:
- This product is not a standalone functional unit and may require professional installation.
- Product images are for illustration purposes only and may sometimes differ from the actual appearance of the item. However, this does not change its basic properties.
Additional parameters
| Category: | Pre-Made Electronic Modules & Accessories |
|---|---|
| Warranty: | 2 years |
| Weight: | 0.088 kg |
Product rating
The average product rating is 5,0 out of 5 stars.
9 ratings
5
4
3
2
1
Leave a rating
List of ratings
Discussion
List of discussions
MS
BT CODEC
Milan Stejskal
Jaká verze BT a kodeky jsou v modulu implementované?
KL
BT CODEC
Konstantin Láska
Zdravím,
Výrobce to bohužel neuvádí
LM
Lukáš Matyasko
Dobrý den mám dotaz, pokud připojím k tomuto zesilovač druhý přez aux východ na sluchátka budou hrát oba když se připojím jen přez Bluetooth k tomu prvnímu.nebo se signál přeruší a bude hrát pouze ten druhý? Děkuji za odpověď
A
2x50w bass shaker repro
Ales
Dobry den, pokud pripojim tento zesilovac k pc pres usb, bude viden jako externi zvukova karta? Jaky napajeci adapter by jste doporucili z vasi nabidky pokud bych pripojil tyto 2x 50w 4ohm bass shakery https://www.soundimports.eu/en/dayton-audio-bst-1.html?gad_source=1&gclid=EAIaIQobChMI9tiF38OphQMV4JKDBx3iFQoZEAAYASAAEgI2TfD_BwE ? Dekuji moc
MF
2x50w bass shaker repro
Martin Frajdl
Dobrý den, na tyto Vaše otázky naleznete odpovědi v popisu zboží. Je tam informace o tom, že funguje jako zvuková karta a taktéž je tam uvedený způsob napájení.
M
15 W reproduktory
Miroslav
Ahoj, chcel by som k tomuto modulu pripojit 15 Watove 4 Ohmove reproduktory, ale udavate najmenej 12V a to pri 4 Ohmoch doda az 20 Watt. Neznicim ich? Je mozne tam pustit menej ako 12V a tym znizit vykon zosilovaca? Dakujem za radu.
R
Richard
jo
R
Richard
jo
MF
15 W reproduktory
Martin Frajdl
Dobrý den, použít menší napětí by samozřejmě výkon snížilo. Můžete napájet až 5V.
