VFC-M0701T frequency inverter 1.5 kW 240 V 3ph output RS485

Product detailed description

Frequency inverter for the smooth speed control of three-phase asynchronous motors up to 1.5 kW. Power it from a standard 240 V single-phase socket to get a three-phase output voltage of 0–240 V, allowing you to run a three-phase motor even where a 400 V supply is unavailable. Adjust the speed using the panel buttons, a potentiometer, an external signal, or via the RS485 bus — making it easy to integrate the inverter into your own automation. It can be used with lathes, milling machines, drills, grinders, conveyors, fans and pumps.

Specifications:

• Model: VFC-M0701T
• Input voltage: 1× 240 V AC (single-phase, 50/60 Hz)
• Output voltage: 3× 0–240 V AC (three-phase)
• Motor type: asynchronous three-phase, 240 V (delta connection)
• Motor power: 1.5 kW / max. 6.8 A
• Frequency range: 0–400 Hz
• Controls:
  • front panel buttons
  • integrated potentiometer
  • external signals (start/stop, reverse, analogue input)
  • RS485 bus (Modbus)
• Protections:
  • overcurrent, overload
  • overvoltage and undervoltage
  • inverter overheating
  • output short circuit
• Operating conditions:
  • Temperature: −10 °C to +50 °C
  • Humidity: 0–65 % RH (non-condensing)
• Weight: 450 g
• Warranty: 2 years

Package contents:

• 1× 1.5 kW frequency inverter with RS485

Important note:

• The inverter is intended exclusively for three-phase asynchronous motors. It is not suitable for single-phase motors with a starting or running capacitor — do not connect a capacitor-run motor to its output.
• The motor must be connected in a delta configuration at 240 V. For motors with a 230/400 V rating, this means switching the terminal block from star (Y) to delta (D). A motor designed exclusively for 400 V in star configuration is not compatible with this inverter.
• If you operate the motor at speeds lower than its rated speed, heat dissipation is reduced in machines with internal ventilation. Therefore, ensure additional cooling or operate the motor at a lower load.
• Do not connect a contactor or switch between the inverter and the motor — always disconnect the motor only via the inverter.

Note:

• This product is not a standalone functional unit and may require professional installation.
• Product images are for illustrative purposes only and may sometimes differ from the actual appearance of the item. However, this does not change their basic properties.