GA12-N20 6V motor with gearbox
Code: LA143024A LA143024B LA143024C LA143024D LA143024E LA143024F Choose variantFree Shipping
From 100 EUR
30 Days to Return
For Registered

30 Days to Return
For Registered Customers

Free Shipping
For orders from 100 EUR

Customer Care
We handle complaints within 5 days

Quick dispatch
Within 24 hours
Product detailed description
The GA12-N20 is a compact DC motor with an all-metal gearbox for a rated voltage of 6 V. Thanks to its small 12 mm diameter and low power consumption, it is ideal for battery-powered projects – small robots, models, sliders and rotating mechanisms – where it can be powered by four AA cells, a Li-ion battery or directly from a motor driver. Choose from six variants with no-load speeds ranging from 60 to 1000 RPM; the lower the speed, the higher the torque. The 3 mm diameter output shaft features a D-flat end to ensure that mounted wheels or couplings do not slip.
Specifications:
- Type: DC geared motor (GA12-N20, N20 series)
- Nominal voltage: 6 V DC
- Supply voltage range: 3–9 V DC
- Gearbox: all-metal, spur gear
- Speed variants (no-load): 60, 100, 150, 300, 500 and 1000 RPM
- No-load current: approx. 10–160 mA depending on variant
- Torque:
- at maximum efficiency: approx. 0.06–1.50 kg·cm depending on version
- at stall: approx. 0.40–10.0 kg·cm depending on version
- Output shaft: Ø 3 mm, length 10 mm, D-shaped (flat)
- Dimensions:
- Motor: Ø 12 × 15 mm
- Gearbox: 12 × 10 mm, length 9 mm
- Total length: approx. 24 mm without shaft, approx. 34 mm including shaft
- Rotation direction: bidirectional, according to power polarity
- Application: robotics, DIY vehicles, models, automation, small drives and feeds


Package contents:
- 1× GA12-N20 6V geared motor (according to selected RPM version)
Note:
- Control the motor via an H-bridge or transistor; never connect it directly to a microcontroller output.
- The stated speeds apply to no-load conditions; they decrease under load while current consumption increases.
- Fit the wheel, pinion or coupling onto the shaft without impact – a shock to the shaft will damage the gearbox gearing.
- Do not exceed the rated voltage; higher voltage shortens the lifespan of both the gearbox and the brushes.
- This product is not a standalone functional unit and may require professional installation.
- Product images are for illustrative purposes only and may sometimes differ from the actual appearance of the item. However, this does not change their basic properties.
Additional parameters
| Category: | DC & Stepper Motors |
|---|---|
| Warranty: | 2 years |
Product rating
The average product rating is 5,0 out of 5 stars.
6 ratings
5
4
3
2
1
Leave a rating
List of ratings
Discussion
List of discussions
TT
RPM
Tadeáš Těhan
Dobrý den,
RPM údaj který je uveden v datasheetu je RPM na hřídeli (po převodech) nebo RPM motoru.
A poté jaký je poměr převodu.
Děkuji
JB
verze 30 rpm ?
jan benedek
dobry den,
ve variantach nemate nejpomalejsi verzi s 30rpm - shanim :)
KL
verze 30 rpm ?
Konstantin Láska
Bohužel zatím nemáme, v planu na příští rok.
JH
Upevňovací šrouby
Jan Haspeklo
Dobrý den ,chtěl jsem se zeptat jestli se k motorům s převodovkou tohoto tipu dájí u vás zakoupit instalační šroubky popřípadě jaký je to závit děkuji za info Haspeklo.
MF
Upevňovací šrouby
Martin Frajdl
Dobrý den, tyto šroubky bohužel v nabídce nemáme. Rozměr závitu je M1,6
JK
Napětí
Jindřich Kunc
Zdravím :)
U motorů konkrétně GA12-N20 6V200 ... Dá se použít 9v baterie ? Koukám, že se píše range od 3 do 9 voltů, ale aby to nebyla moc zátěž a nespálil se ...
Předem děkuji za objasnění s pozdravem Jindra :)
MF
Napětí
Martin Frajdl
Dobrý den, toto napětí se sice použít dá, ale je třeba sledovat jak se bude motor zahřívat. Při znatelném vyšším ohřevu bude potřeba napětí snížit.
VK
Použití jako generátor
Václav Kasan
Dá se tento motor použít jako generátor ?
MF
Použití jako generátor
Martin Frajdl
Dobrý den, každý motor s permanentním magnetem lze využít i jako generátor.
T
Proudový odběr motoru?
TP
Jaký je (maximální/běžný) proudový odběr motoru (kvůli dimenzování ovládání)?
KL
Proudový odběr motoru?
Konstantin Láska
Dobrý den,
100-150mA při zatíženi.
