Coaxial Cable 1mm 15cm U.FL (IPEX1) Connector

Product detailed description

A coaxial pigtail cable with a U.FL (IPEX1) connector links a wireless module to an external antenna or routes a high-frequency signal from the board outside the device. One end features a crimped U.FL (IPEX1) socket connector, while the other end is stripped and tinned, allowing you to terminate it exactly as needed – either by soldering it directly to a PCB or mounting another connector. The thin cable with a 1 mm diameter is easy to route even in cramped enclosures and, with an impedance of 50 Ω, is suitable for ESP8266, ESP32, LoRa and GSM modules.

Specifications:

• Type: coaxial high-frequency cable (pigtail)
• Connector: U.FL (IPEX1), socket – on one end
• Second end: free, without connector (ready for soldering)
• Impedance: 50 Ω
• Outer cable diameter: approx. 1 mm (type RG-1.13)
• Length: approx. 15 cm
• Colour: grey
• Frequency range: typically up to 6 GHz (868/915 MHz, 2.4 GHz and 5 GHz)
• Use: connecting a module to an external antenna, routing RF signal from PCB, antenna feed replacement or extension
• Suitable antennas with U.FL (IPEX1) connector:
  • WiFi 45×10 mm Antenna 2.4G 5dB U.FL (IPEX1)
  • WiFi 42×12 mm Antenna 2.4G 5dB U.FL (IPEX1)
  • Mini Antenna 3dB 2.4G U.FL (IPEX)

Package contents:

• 1× coaxial cable 1 mm, 15 cm, U.FL (IPEX1) connector

Note:

• The U.FL connector is designed for a limited number of mating cycles (typically up to 30 cycles) – when disconnecting, pull by the connector, never by the cable.
• This product is not a standalone functional unit and may require professional installation.
• Product images are for illustrative purposes only and may sometimes differ from the actual appearance of the item. However, this does not change their basic properties.