LaskaKit eduxo Raspberry Pi Pico IoT Starter kit

Product detailed description

LaskaKit eduxo IoT Starter kit is a complete set of components for the freely available Czech book "How to make things talk", which we have prepared in collaboration with the eduxo brand. The book will guide you step-by-step through working with the Raspberry Pi Pico 2 W microcontroller – from a simple traffic light to a weather station, home automation, and your own cloud-connected IoT chain. The kit is suitable for both beginner hobbyists and advanced makers who want to learn about electronics and IoT or refresh their knowledge. All components are stored in a clear, transparent box.

Specifications:

• Control board: Raspberry Pi Pico 2 WH (RP2350, Wi-Fi and Bluetooth, pre-soldered pins)
• Power supply: 5 V via microUSB, optionally from a 3× AA battery holder
• Wiring: solderless, on an 830-pin solderless breadboard
• Book: "How to make things talk" by eduxo, freely available online
• Projects in the book:
  • traffic light
  • reaction game
  • alarm with motion sensor
  • thermometer with display and data logger
  • code lock
  • parking sensor
  • weather station with history
  • complete IoT chain: sensor → broker → database → graph
  • home automation with decision logic
  • edge gateway with a secure bridge to the cloud

Package contents:

• Basics:
  • 1× Raspberry Pi Pico 2 WH, pre-soldered pins
  • 1× microUSB data cable, 50 cm
  • 1× solderless breadboard 830 pins, white
  • 1× male-to-male breadboard jumper wire set, 65 pcs
  • 1× Dupont jumper wire male-female, 40 cores, 20 cm
  • 1× resistor kit 1000 pcs (34 values 1R–10M, 0.25 W, 5 %)
  • 5× electrolytic capacitor 100 µF / 35 V
• Inputs and outputs:
  • 10× LED 5 mm, red
  • 10× LED 5 mm, green
  • 10× LED 5 mm, yellow
  • 5× tactile switch 6×6×5 mm
  • 1× active buzzer 5 V
  • 1× passive buzzer 5 V
  • 2× potentiometer 10 kΩ, linear
  • 2× photoresistor 5 mm GL5528
• Sensors:
  • 1× DHT11 air temperature and humidity sensor, module
  • 1× DS18B20 digital waterproof temperature sensor, 1 m
  • 1× HC-SR04 ultrasonic distance sensor
  • 1× HC-SR501 PIR motion detector
  • 1× Keyes KY-021 reed magnetic switch
  • 3× neodymium cylinder magnet 7 × 2.48 mm
  • 1× shock sensor SW-520D
  • 1× vibration sensor SW1801P with LM393
  • 1× rain sensor YL-83
  • 1× combustible gas sensor MQ-2
  • 1× infrared flame sensor, 4-pin module
  • 1× capacitive touch sensor TTP223B
• Actuators and Display:
  • 1× micro servo SG90 9 g, 180°
  • 1× 1-channel 5V relay module, low level, 250 VAC / 10 A
  • 1× battery holder 3× AA, wire leads
  • 1× 28BYJ-48 stepper motor
  • 1× ULN2003 stepper motor driver
  • 2× RGB LED 5 mm, diffused, common cathode
  • 1× 10-segment LED bar graph, multicolor
  • 1× OLED display 128×64 0.96" I²C
  • 1× 4×4 matrix membrane keypad
• Enclosure:
  • 1× transparent plastic box

Note:

• This product is not a standalone functional unit and may require professional installation.
• Product images are for illustrative purposes only and may sometimes differ from the actual appearance of the item. However, this does not change their basic properties.