Antenna mounting bracket for wall and pole with U-bolts, 80 × 60 mm

Product detailed description

The LJ-JM-BLG mounting bracket is used for the secure attachment of an outdoor antenna to a wall or a mast. The 80 × 60 mm steel base plate features ⌀ 9 mm holes in all four corners, allowing it to be screwed directly onto a flat surface or clamped onto a pipe or mast using the included U-bolts without any drilling. In the centre of the plate is a socket where the antenna base is inserted and tightened. It is most commonly used for fiberglass omnidirectional antennas with an N connector (LoRa, GSM/LTE, Wi-Fi), but it also works for other devices that need to be raised above roof level or offset from a wall. Thanks to its galvanised surface finish, the bracket withstands permanent outdoor exposure.

Specifications:

• Model: LJ-JM-BLG
• Use: mounting outdoor antennas (typically fiberglass omnidirectional) on walls and masts
• Mounting method:
  • to wall: 4× ⌀ 9 mm through-holes in the corners of the plate
  • to mast / pipe: using the included U-bolts
• Dimensions:
  • Base plate: 80 × 60 mm
  • Antenna base socket: width 50 mm, height 30 mm
  • Mounting holes: ⌀ 9 mm (4×)
  • U-bolts: clearance 51 mm, height 85 mm
• Max. mast diameter: approx. 50 mm (depending on U-bolt clearance)
• Suitable for: TX868-BLG-40 Fiberglass Antenna 5.5dBi 868MHz N-type male
• Material: steel with a galvanised surface finish
• Colour: silver (galvanised)
• Environment: suitable for outdoor use

Package contents:

• 1× mounting bracket with socket 80 × 60 mm
• 2× U-bolts with nuts

Note:

• Screws and wall plugs for wall mounting are not included – please choose them according to the surface type.
• This product is not a standalone functional unit and may require professional installation.
• Product images are for illustrative purposes only and may sometimes differ from the actual appearance of the item. However, this does not change its basic properties.