Binding post with 4 mm banana plug socket, 20 A, M4×36

Product detailed description

The binding post with a 4 mm banana socket serves as an output terminal for laboratory power supplies, chargers, or test fixtures. You can connect a conductor in three ways: insert a 4 mm banana plug into the socket in the head of the binding post, screw a cable lug onto the rear M4 thread, or pass a stripped conductor end through the 2 mm transverse hole in the screw and tighten it with a nut. The binding post is secured to the panel with a nut through two plastic insulating washers, which separate it from the metal panel. The nickel-plated copper screw supports up to 20 A. The terminal is available in black and red for easy polarity identification. For connection, we recommend, for example, 4 mm banana-to-banana test leads or banana-to-alligator clip leads.

Specifications:

• Type: isolated binding post with banana socket
• Compatibility: 4 mm banana plugs, M4 cable lugs, conductors up to 2 mm
• Max. current: 20 A
• Thread: M4
• Mounting hole: 6 × 7 mm (oval)
• Fastening: M4 nut with insulating washers
• Conductor connection: 4 mm banana plug, M4 cable lug, or 2 mm transverse hole
• Material:
  • Insulation: ABS plastic
  • Contact: nickel-plated copper
• Dimensions:
  • Outer dimensions: Ø 13 × 36 mm
  • Insulating head: length 23.2 mm
• Variants:
  • Black
  • Red

Package contents:

• 1× M4 screw with 4 mm banana socket
• 1× insulated head (depending on chosen colour)
• 2× insulating washer
• 2× M4 nuts
• 1× washer

Note:

• This product is not a standalone functional unit and may require professional installation.
• Product images are for illustrative purposes only and may sometimes differ from the actual appearance of the item. However, this does not change their basic properties.