RobotDyn graphic LCD display 128x64 + Joystick Shield

Product detailed description

RobotDyn graphic LCD display 128x64 + Joystick Shield

You just put on Arduino Mega, UNO or Leonardo. This shield has a 128 x 64 pixel backlit graphic LCD display. The display can be used to show text or graphics. Operations are simplified by the powerful u8glib universal library. Displays must be initialized:

U8GLIB_NHD_C12864 u8g(13, 11, 10, 9, 8);	// SPI Com: SCK = 13, MOSI = 11, CS = 10, CD = 9, RST = 8

The LCD is controlled via the SPI interface using five digital pins D8, D9, D10, D11 and D13. The backlight uses digital pin D7. The 5-position joystick is connected to analog input A0. The buzzer is connected to D3. If you need the D3 for other functions, you can disconnect the buzzer from the D3. Cut the bridge on the underside of the board.

This shield works from 3.3V, but is fully compatible with 5V boards.

Specifications:

• Resolution: 128x64
• Monochrome display
• Joystick
• Buzzer
• Module dimensions: 54x56mm
• Display area size: 42x28mm

Included in delivery:

• 1 pc RobotDyn graphic LCD display 128x64 + Joystick Shield

Sources:

Dimensions Pinout Datasheet Schema

Remark:

• This product is not a standalone functional unit and may require professional installation.
• Product images are for illustration purposes only and may sometimes differ from the actual appearance of the item. However, this does not change its basic properties.
• After mounting the shield, please check that the pins from the bottom side do not touch the component housings on the bottom plate! This could cause a short circuit and destroy the shield or even the motherboard. Goods damaged in this way are not covered by the warranty!