SMA Male - N-Type Female antenna cable

Product detailed description

The antenna extension cable with N and SMA connectors is used to connect an external antenna to a module, gateway, or router. It allows you to place the antenna where the signal is strongest – on the roof, a mast, or behind a window – while keeping the device inside an enclosure. The cable is a low-loss 3D-FB type with pure copper connectors, ensuring that signal loss remains reasonable even at ten metres. Choose from three lengths depending on how far the antenna needs to be from the device. It is suitable for LoRa/LoRaWAN, GSM/LTE, NB-IoT, and 2.4 GHz Wi-Fi.

Specifications:

• Type: coaxial antenna extension cable (pigtail)
• Connectors:
  • End 1: N female (N-K, antenna socket)
  • End 2: SMA male (SMA-J, inner pin)
• Connector material: pure copper
• Cable: 3D-FB, low-loss coaxial
• Impedance: 50 Ω
• Frequency range: up to 3 GHz (LoRa 868 MHz, GSM/LTE, NB-IoT, Wi-Fi 2.4 GHz)
• Suitable for: TX868-BLG-40 Fiberglass Antenna 5.5dBi 868MHz N-type male
• Colour: black
• Variants:
  • 1 m: XC-NK-SJ-100
  • 5 m: XC-NK-SJ-500
  • 10 m: XC-NK-SJ-1000

Package contents:

• 1× antenna cable N female / SMA male (depending on selected length)

Note:

• Attenuation increases with cable length – for the best signal, always choose the shortest length that meets your needs.
• Tighten connectors by hand or with a torque wrench only; over-tightening will damage the dielectric.
• This product is not a standalone functional unit and may require professional installation.
• Product images are for illustrative purposes only and may sometimes differ from the actual appearance of the item. However, this does not change its basic properties.