Data Storage & Transmission, Page 10

Wireless module for communication over long distances with its own antenna over 2.4GHz frequency.

Wireless communication module for 868MHz RFM22-S2 with SPI communication.

Wireless remote control AK1000-6F working on 433MHz frequency with EV1527 protocol. It offers 6 channels for controlling various devices such as gates, roller shutters,...

XGecu PRO T48 universal memory and MCU programmer, USB

The ZX-08CDEN is a compact handheld RFID card and chip reader and writer with support for 125 kHz and 13.56 MHz frequencies. Thanks to its colour display and USB PC...

Converter from logic 3.3V to 5V or vice versa with four channels, which is useful for connecting boards like ESP32 to peripherals operating on 5V logic.

4ch I2C ADC converter for Raspberry Pi, ADS1115

Popular compact antenna for use anywhere at a greater distance from your own equipment.The antenna is in SMA version. Thanks to its frequency range, it is used not only for GSM...

Audio player for MP3 files from a microSD card that can be controlled with the Arduino board.

Bluetooth module HC-05 for wireless serial communication between the boards or board and a laptop or mobile phone with bluetooth.

Dual Bluetooth module JDY-33, 3.0 SPP + 4.2 BLE. Slave communication mode.

Converter between USB and UART bus with CP2102 chip, suitable for example for programming boards Arduino.

eMMC microSD memory reader

The TX868-BLG-40 is a fiberglass antenna designed to operate in the 868 MHz band, with a length of approximately 400 mm and a straight male N-connector. Its fiberglass shell...

Miniature radio receiver module between 76MHz - 108MHz. It is able to connect to the board using the I2C bus and on the other side it connects to the amplifier.

FM radio module with its own antenna, which you are able to control using I2C bus with Arduino.

GPS positioning module, with its own ceramic antenna and additional eeprom memory.

HTIT-Wsh (Wireless shell) is a LoRa node module with long range, high reception sensitivity and low power consumption (approx. 9uA). HTIT-Wsh consists of an MCU (ESP32-S3FN8)...

Heltec Wireless Stick Lite V3.1 868MHz SX1262 WiFi module is a highly integrated development module designed for wireless communication and IoT (Internet of Things)...

Wireless Tracker is a development kit based on ESP32-S3FN8. It integrates the SX1262 and UC6580 to provide a fast GNSS solution for IoT. It can track any object and then upload...

The HopeRF RFM96W is a powerful wireless communication module operating in the 433 MHz band, utilising LoRa™ technology to achieve long range and high sensitivity with minimal...

Module for switching GPIO pins via web interface. LAN connection - RJ45. 16 channels can be controlled. Suitable for relay switching.

MCP23017 I2C 16 bit I/O Expander

LilyGO TTGO LoRa32 T3_V1.6 868Mhz 0.96" SMA WiFi Module