GA12-N20 12V gear motor
Code: LA143024G LA143024H LA143024I LA143024J LA143024K LA143024L LA143024M Choose variantFree Shipping
From 100 EUR
30 Days to Return
For Registered

30 Days to Return
For Registered Customers

Free Shipping
For orders from 100 EUR

Customer Care
We handle complaints within 5 days

Quick dispatch
Within 24 hours
Product detailed description
The GA12-N20 is a compact DC motor with an all-metal gearbox for a rated voltage of 12 V. With a diameter of just 12 mm, the gearbox provides low speeds and decent torque, making it suitable for powering small robot wheels, linear actuators, rotating and lifting mechanisms, latches, models, or camera movements. You can choose from seven variants with no-load speeds ranging from 60 to 2000 RPM – the lower the speed, the higher the torque. The 3 mm diameter output shaft features a D-flat end to ensure that mounted wheels or couplings do not slip.
Specifications:
- Type: DC geared motor (GA12-N20, N20 series)
- Rated voltage: 12 V DC
- Supply voltage range: 6–12 V DC
- Gearbox: all-metal, spur gear
- Speed variants (no-load): 60, 100, 150, 300, 500, 1000 and 2000 RPM
- No-load current: approx. 30–190 mA depending on the variant
- Torque:
- at maximum efficiency: approx. 0.30–2.00 kg·cm depending on the variant
- at stall: approx. 2.40–16.0 kg·cm depending on the variant
- Output shaft: Ø 3 mm, length 10 mm, D-shaped (flat)
- Dimensions:
- Motor: Ø 12 × 15 mm
- Gearbox: 12 × 10 mm, length 9 mm
- Total length: approx. 24 mm without shaft, approx. 34 mm including shaft
- Rotation direction: bidirectional, according to power polarity
- Application: robotics, DIY vehicles, models, automation, small drives and feeds


Package contents:
- 1× GA12-N20 12V geared motor (according to the selected RPM variant)
Note:
- Control the motor via an H-bridge or transistor; never connect it directly to a microcontroller output.
- The stated speeds apply to no-load conditions; they decrease under load while current consumption increases.
- Fit the wheel, pinion or coupling onto the shaft without impact – a shock to the shaft will damage the gearbox gearing.
- Do not exceed the rated voltage; higher voltage shortens the lifespan of both the gearbox and the brushes.
- This product is not a standalone functional unit and may require professional installation.
- Product images are for illustrative purposes only and may sometimes differ from the actual appearance of the item. However, this does not change their basic properties.
Additional parameters
| Category: | DC & Stepper Motors |
|---|---|
| Warranty: | 2 years |
Product rating
The average product rating is 4,8 out of 5 stars.
11 ratings
5
4
3
2
1
Leave a rating
List of ratings
Discussion
List of discussions
VK
Velikost montážních děr
Vincent Kopecký
Dobrý den. Svě díry určené pro montáž motoru jsou m2 nebo m3 (případně jiný rozměr)
VH
Velikost montážních děr
Vít Hrnčíř
Dobrý den. Jedná se o závity M1.6
MM
Enkoder
Matous Martinka
Dobry den, je souscasti motorku take i enkoder nebo ten si musim dokoupit zvlast, ptam se protoze chci ovladat motorek pomoci h mustku tak jestli mi to bude fungovat. diky moc a hezky den, Martinka.
MF
Enkoder
Martin Frajdl
Dobrý den, tento motor žádný enkodér nemá.
M
Jaké k tomu napájení do zásuvky ?
Matěj S.
Předem děkuji za odpověď .
MF
Jaké k tomu napájení do zásuvky ?
Martin Frajdl
Dobrý den, vyhoví jakýkoli síťový adaptér s napětím 12V a proudem cca 1A, např. tento: https://www.laskakit.cz/napajeci-adapter-sitovy-1000ma-5-5-2-1-mm-12v/
J
Točivý moment
Jarda
Na výběr mám z možností od 60-1000 RPM, točivý moment ale zůstává stejný: 0.24kg/cm?
Jaký točivý moment má motor pro různé rychlosti?
MF
Točivý moment
Martin Frajdl
Dobrý den, tato informace není přesná. Do obrázků jsme zařadili i tabulku, kde jsou tyto parametry popsány.
