GUITION JC4880P443C-I-W-Y ESP32-P4 + C6 - Development Module with 4.3" 480x800 Display

Product detailed description

GUITION JC4880P443C-I-W-Y is a compact 4.3" development module based on a pair of ESP32-P4 and ESP32-C6 chips. It combines a powerful dual-core RISC-V processor, Wi-Fi 6 with Bluetooth 5, a vertical 480×800 IPS capacitive touch display, a 2Mpx camera, audio components, and an extensive array of connectors into a single all-in-one module. Thanks to its compact dimensions and protective case, it is suitable for wall-mounted HMI panels, smart home controllers, industrial terminals, and graphical applications using the LVGL library.

The module comes in a version with a protective case and is pre-programmed with a demo application from the factory – simply connect the power and the module is ready to run. It supports one-click programming, and ready-made libraries and sample programs are available for Arduino IDE and ESP-IDF, allowing you to launch even complex projects surprisingly quickly.

Specifications:

• Model: GUITION JC4880P443C-I-W-Y (version with protective case, board JC4880P443)
• MCU – main unit: ESP32-P4 (module JC-ESP32P4-M3, ESP32P4NRW32), dual-core RISC-V, clock speed 360 MHz (core supports up to 400 MHz), FPU and AI instruction extensions
• Wireless section: ESP32-C6 connected via ESP-Hosted (SDIO/SPI/UART) – 2.4GHz Wi-Fi 6, Bluetooth 5 (LE)
• Memory:
  • PSRAM: 32 MB
  • Flash: 16 MB
  • Internal memory: 768 kB HP L2 RAM + 32 kB LP SRAM + 128 kB HP ROM
  • External storage: TF card slot (microSD)
• Display:
  • Diagonal: 4.3" TFT
  • Type: IPS
  • Resolution: 480 × 800 px (vertical)
  • Color depth: 24bit RGB, 16.7 million colors
  • Display driver: ST7701S
  • Touch: capacitive
  • Active Area: 93.60 × 56.16 mm
• Camera: 2 Mpx module on camera interface
• Multimedia: hardware H.264 encoding and JPEG decoding
• Audio: integrated microphone, speaker connector (MX 1.25 2P)
• Power Supply:
  • Supply Voltage: 5 V DC (via USB-C)
  • Current Consumption: approx. 320 mA
  • Battery: connector for Li-ion cell (MX 1.25 2P) with charging circuit
• Connectors and Interfaces:
  • USB-C ×2: one full-speed, one high-speed (power, programming, serial output)
  • μ-Plug (Qwiic, easyC, STEMMA QT): SH 1.0 4P, I2C
  • UART0: MX 1.25 4P
  • UART: MX 1.25 4P
  • RS485: MX 1.25 4P
  • Camera Interface: FPC connector
  • Expansion Pins: 2×13 pin header with 2.54 mm pitch
• Breakout pins on the 2×13 header:
  • Power: 3V3 (2×), 5V (2×), GND (3×), ESP_3V3
  • GPIO: GPIO28, 29, 30, 31, 32, 33, 34, 35, 49, 50, 51, 52
  • I2C: I2C_SDA, I2C_SCL
  • ESP32-C6: C6_U0RXD, C6_U0TXD, C6_IO9, C6_CHIP_PU
• Dimensions:
  • Module: 117.01 × 69.41 mm
  • Front side with case: 114.40 × 66.80 mm
• Weight: approx. 120 g
• Operating Temperature: -20 °C to +70 °C
• Storage temperature: -30 °C to +80 °C
• Supported development environments: Arduino IDE (2.3.4 or newer, board "ESP32P4 Dev Module"), ESP-IDF, MicroPython, Guition
• GUI Support: LVGL library, SquareLine Studio
• Pre-loaded firmware: built-in demonstration programs

Package contents:

• 1× GUITION JC4880P443C-I-W-Y ESP32-P4 + C6 Development Module With Display 4.3" 480x800 (With Protective Case)

Note:

• This product is not a standalone functional unit and may require professional installation.
• Product images are for illustrative purposes only and may sometimes differ from the actual appearance of the item. However, this does not change their basic properties.