KR602E RFID access reader with keyboard 125Khz Wiegand IP65

Product detailed description

The KR602E waterproof RFID reader with keypad is used for access control to facilities via RFID card, key fob, or numeric code. It reads 125 kHz cards and transmits the read card number or entered code via a 34 or 26-bit Wiegand interface, allowing it to be connected to a standard access control panel or controller. Audio and visual signalling can be controlled by a master controller. Thanks to the IP65 rating, it can also be mounted outdoors.

Specifications:

• Frequency: 125 kHz
• Supported cards: 125 kHz ID cards and key fobs (EM4100 and compatible)
• Reading range: approx. 5–10 cm
• Output: Wiegand 26 bit (default) / 34 bit
• Power supply: 12 V DC (±5 %)
• Power consumption:
  • Idle: < 80 mA
  • When reading a card: < 200 mA
• Signalling: buzzer and LED, externally controllable
• Protection rating: IP65 (outdoor use)
• Operating conditions:
  • Temperature: −10 °C to +50 °C
  • Humidity: 20–80% RH
• Storage temperature: −20 °C to +60 °C
• Dimensions: 86 × 86 × 20 mm

Connection:

• Red: VCC (+12 V)
• Black: GND
• Green: D0
• White: D1
• Purple: buzzer (active low – connect to GND)
• Grey: green LED (active low – connect to GND)
• Yellow: Wiegand format selection – disconnected = 26 bit (default), connected to GND = 34 bit

Package contents:

• 1× KR602E RFID reader with keypad

Note:

• This product is not a standalone functional unit and may require professional installation.
• Product images are for illustrative purposes only and may sometimes differ from the actual appearance of the item. However, this does not change their basic properties.