LaskaKit dny, Page 2

1m microHDMI - HDMI cable

Quality USB cable with microUSB end suitable for some phones or tablets like Arduino Nano with a wire length of 100 cm.

Cable connecting two USB-A connectors with a wire length of 100cm.

100W Power Bank Kit for 6× Li-Ion 21700 is a robust DIY solution (case + electronics) for building a powerful portable power source with modern USB-C PD 3.0, QC 3.0, and support...

100W LED Warm White 3500K

Kit for a powerful 100W power bank designed for 4× 21700 Li-Ion cells allows you to assemble a compact and very powerful energy source with support for modern fast charging...

A panel of 100 intelligent NeoPixel LEDs, which can be individually adjusted for red, blue and green intensity.

Electrodes for spot welding of battery contacts and battery packs

Adapter for small 10cc dispensing tubes to the AD-982 dispenser.

10W IR LED 20x29mm 850nm

Smart LCD 12864 with SD card reader. Kit includes SD reader, rotary encoder and 128 x 64 dot matrix LCD display. Monochrome, blue backlit display with 128 x 64 dot resolution.

Large LCD display with 128x64 blue pixels and ST7920 converter for parallel communication.

12V/110V power supply for flexible neon tubes up to 5m

12V/110V power supply for flexible neon tubes up to 5m

12V/110V power supply for flexible neon tubes up to 20-50m

13.3" 2K 2560x1440 TFT display, HDMI, touch

a 16-channel PWM pin add-on module using the PCA9685 chip, which connects to the board via the I2C bus.

16-Channel Relay Module 12VDC is a switching board suitable for controlling up to eight separate devices with higher voltage or current.

16-channel 12V relay module 250VAC 10A, RS485 - Modbus RTU or AT commands. DIN rail mounting.

16-Channel Relay Module 5VDC is a switching board suitable for controlling up to eight separate devices with higher voltage or current.

LCD display with 2 rows of 16 characters with pixels in blue communicating with the board via parallel bus.

LCD display with 2 rows of 16 characters with pixels in blue color communicating with the board via I2C bus.

LCD display with 2 lines of 16 characters with pixels in green communicating with the board via I2C bus.

LED indicator of the capacity status of one Lipo Li-ion battery on the voltage base between four states.