LaskaKit dny, Page 62

Phillips screwdriver 3.0x130mm

Sensor for determining motor speed using a gridded disk and photoresistor.

Need to monitor the engine speed or find out the rotation speed of a piece of equipment? This optical speed sensor with a 5mm gap is a reliable partner for any DIY or robotics...

Photoresistor 5mm GL5516

A photoresistor is a semiconductor component that changes its resistance depending on the ambient light.

NPN phototransistor 5800B 5mm, 940nm

ARM Dual Core Microcontroller Based Development Board Cortex-M0+ Raspberry Pi RP2040 264KB SRAM + 2MB on-board Flash

Pigtail U.FL - N Female with 15 cm long RG178 cable is a patch cable designed to connect devices with a U-connector.FL (or also known as IPEX) at one end and an N Female...

Crimp pin for JST-PH connector

Crimp pin for JST-XH connector

The low pin header with 40 pins and a standard 2.54 mm pitch is ideal for cases where a compact connection height is required. Thanks to the reduced height of the plastic body...

Soldering Pen Replacement Tip Set PINE64 Pinecil

Pine64 Pinecil is a soldering iron that was developed by Pine64, a company that specializes in open-source hardware and software.

120W desktop power adapter. It has 1 USB-C port and 4 USB-A ports.

A sensor that uses the pyroelectric effect to detect movement in the environment by changing the light that comes onto the detection surface.

Plantower PMS6003 Optical air quality sensor

Plastic micro servo with a maximum load capacity of 9g, capable of 180° rotation

A continuous plastic micro servo that is capable of rotating a full 360°.

Plastic screw with hemispherical head and cross. 3,5x12 BN 82428 ZB

Plastic screw with hemispherical head and cross. 3,5x8 BN 82428 ZB

Plastic screw with hemispherical head and cross. 3x8 BN 82428 ZB

Plastic screw with hemispherical head and cross. groove 2,2x10 BN 82428 ZB

Plastic screw with hemispherical head and cross. groove 2,2x14 BN 82428 ZB

Plastic screw with hemispherical head and cross. groove 2,2x16 BN 82428 ZB