LaskaKit Meteo Mini Weather Station 2.0

Product detailed description

Temperature measurement is very popular - and who doesn't want to keep track of how it is outside? With our weather station you will not only measure temperature, but also humidity and pressure! And it's a smart solution - you don't have to deal with the power supply to the weather station. The supplied solar panel takes care of this. You might as well think of yourself as a solar baron and enjoy how the battery charges thanks to energy from the sun.

In our brand new version 2.0 of this popular weather station, you'll also find an upgraded solar panel that's much better designed, so you don't have to place it on the radiation shield (that's still an option!), but anywhere within three metres of it. That's how long the cable is, ending with a USB-C connector leading from it.

Values are sent over a Wi-Fi network and here too, when designing the new generation, we have thought about those who are a little further away from the access point - so we also offer a variant with an external antenna that significantly increases the range.

In order to make assembling the kit a pleasure and accessible to a wider range of users, you don't have to solder anything and just use our μShup connector. With our instructions, even a beginner can easily build a weather station.

To get the most out of the measured values, we have prepared an example in the repository of how to send values to the popular Czech service TMEP.cz. So you'll have plenty of charts and historical data at your fingertips, even in a widget on your mobile phone.

ATTENTION! If the weather station is to be placed outdoors or in an area with high humidity, it is recommended to spray the sensor plate with an electronics varnish. Without this treatment, high humidity may cause oxidation and subsequent malfunction of the sensor. Before painting, the sensor itself must be covered on the plate to prevent the sensor hole from being sealed!

You'll need two more things to get it working:

• 3D printed parts. These are not included and either you can order them manufactured, or print them yourself.

Parts list:

Included in delivery:

• 1pc LaskaKit Meteo Mini Weather station 2.0

Remark:

• Printed parts are not includedyou can print them or buy them separately.
• This product is not a standalone functional unit and may require professional installation.
• Product images are for illustration purposes only and may sometimes differ from the actual appearance of the item. However, this does not change its basic properties.