LILYGO® T-Deck Plus ESP32-S3 SX1262 GPS 868 MHz Meshcore IPS WiFi LoRa Module

Product detailed description

LILYGO® T-Deck Plus is a pocket-sized communicator featuring an ESP32-S3, QWERTY keyboard, trackball, 2.8" IPS display, SX1262 LoRa module, plus GPS and a built-in 2000 mAh battery. It comes with Meshcore firmware pre-installed and set to 868 MHz, making it fully functional straight out of the box — no need to upload software, purchase a battery, or deal with antennas, and it knows its position thanks to GPS. Alongside LoRa, it supports WiFi and Bluetooth 5 LE, and includes a microphone, speaker, and microSD card slot. It is most commonly used as an offline messenger (e.g. with Meshtastic firmware), a GPS tracker with LoRa transmission, a LoRaWAN terminal, or as a platform for custom handheld DIY projects.

What the Plus version adds:

• GPS/GNSS module — location tracking directly in the device, ideal for trackers and mapping applications
• Built-in 2000 mAh battery — the basic T-Deck is supplied without a battery
• Pre-installed Meshcore firmware — the device starts communicating immediately after power-on
• Note: The GPS module occupies the Grove connector pins; therefore, the Grove connector cannot be used for other peripherals in the Plus version

Specifications:

• Microcontroller: ESP32-S3FN16R8, dual-core Xtensa LX7, up to 240 MHz
• Memory:
  • Flash: 16 MB
  • PSRAM: 8 MB
• Wireless connectivity:
  • WiFi: 2.4 GHz (802.11 b/g/n)
  • Bluetooth: 5 (LE)
  • LoRa: SX1262 transceiver, 868 MHz, transmission power up to +22 dBm, built-in antenna
  • GPS: built-in Ublox GNSS module
• Display:
  • Type: 2.8" IPS with full viewing angle
  • Controller: ST7789 (SPI interface)
  • Resolution: 320 × 240 px
  • Touch: capacitive, GT911 controller
• Controls:
  • Keyboard: QWERTY, dedicated ESP32-C3 controller, I2C communication
  • Trackball: yes, centrally located under the keyboard
  • Button: user (BOOT/IO0)
• Audio: built-in microphone and speaker (I2S interface)
• Memory card: microSD (TF) slot
• Power Supply:
  • Battery: built-in 2000 mAh Li-Pol cell including charging circuit
  • USB: USB-C (programming, power and charging)
  • Battery voltage measurement: pin IO04 (ADC)
• Logic levels: 3.3 V
• Firmware: pre-installed Meshcore (can be reflashed to Meshtastic, LilyGO firmware or custom)
• Programming: Arduino IDE, PlatformIO, MicroPython; manufacturer examples and libraries available on GitHub

Package contents:

• 1× LILYGO® T-Deck Plus ESP32-S3 SX1262 GPS 868 MHz Meshcore IPS WiFi LoRa Module with 2000 mAh Battery

You might also like:

• Basic version without GPS and battery:
  • LILYGO® T-Deck ESP32-S3 SX1262 2.8 ST7789 IPS WiFi LoRa Module

Note:

• This variant has a built-in antenna; no external antenna is connected.
• The Grove connector is occupied by the GPS module and cannot be used for other peripherals.
• Memory card is not included in the package.
• The keyboard is in black; the manufacturer also offers it in white.
• This product is not a standalone functional unit and may require professional installation.
• Product images are for illustrative purposes only and may sometimes differ from the actual appearance of the item. However, this does not change their basic properties.