YOC-FS wind speed sensor - anemometer

Product detailed description

Sensor for wind speed measurement - anemometer working on mechanical principle.

Classic anemometer design with Robinson cross (horizontal wind rose). This ensures that the sensor responds evenly to wind gusts from any direction.

The output of this sensor is a 0-5V analog voltage (or 4-20mA current) corresponding to the wind speed or a digital value on the RS485 bus, depending on the selection.

For the RS485 version, you can set the baud rate by changing the value of the register 0x07D1 (0 = 2400 baud, 1 = 4800 baud (default), 2 = 9600 baud, 3 = 19200 baud, 4 = 38400 baud, 5 = 57600, baud 6 = 115200 baud). Credits to Antonin Blaha for discovering this. 

Specifications:

• Supply voltage: 12-24V
• Max. power consumption: 0.7W (DC 24V)
• Wind speed measurement range: 0.3-30m/s
• Resolution: approx. 0.3 m/sec.
• Wind velocity for start-up: 0.4~0.8 m/sec.
• Accuracy: ±5%
• Output: 0-5V or RS485 or 4-20mA
• Cable length: approx. 0.7m
• Weight: approx. 360g
• Operating temperature: -40 to 80°C
• Material: plastic
• RS485 connection:
  • Black : GND
  • Brown : VCC
  • Blue : + Output (485-A)
  • Yellow : - Exit (485-B)
• 0-5V connection:
  • Black : GND
  • Brown : VCC
  • Blue: + Output 0-5V
  • Yellow: - Output (GND)
• Connection 4-20mA:
  • Black : GND
  • Brown : VCC
  • Blue: Output 4-20mA

Included in delivery:

• 1pc YOC-FS wind speed sensor - anemometer

Remark:

• This product is not a standalone functional unit and may require professional installation.
• Product images are for illustration purposes only and may sometimes differ from the actual appearance of the item. However, this does not change its basic properties.