LILYGO T-Solar Kit - Solar Charging Kit With Waterproof Box, 5.4 W

Product detailed description

LILYGO T-Solar Kit is a complete set that allows you to take your development board outdoors and run it permanently on solar energy. It includes a 5.4 W monocrystalline solar panel, a waterproof box with an internal mounting plate, and an adjustable bracket for wall or pole mounting. The panel connects to the board via a single cable with a JST 2.0 connector and charges the connected battery in the range of 4.4–6 V. The kit is designed for LILYGO boards with a solar interface 2.0 – typically for LoRa gateways, GPS trackers, weather stations, camera traps, or sensors in remote locations without power supply.

Specifications:

• Solar Panel:
  • Type: monocrystalline, laminated (flexible design)
  • Peak Power (Pmax @STC): 5.4 W
  • Voltage at Pmax (Vmp @STC): 5.7 V
  • Current at Pmax (Imp @STC): 947 mA
  • Open-circuit voltage (Voc @STC): 6.9 V
  • Short-circuit current (Isc @STC): 994 mA
• Charging Voltage For Board: 4.4–6 V
• Connection To Board: JST 2.0 Connector (Solar Input)
• Compatibility: LILYGO Boards With Solar Interface 2.0 – T3, T-Echo Lite, T-Beam And T-SIMxx Series, For Example:
  • LilyGO TTGO T-Beam v1.2 LoRa32 GPS NEO-6M 868 MHz
  • LilyGO TTGO T-Beam LoRa32 GPS NEO-6M 433 MHz
  • LilyGO TTGO LoRa32 T3_V1.6 868 MHz 0.96" SMA
  • LilyGO TTGO LoRa32 T3_V1.6.1 433 MHz 0.96" SMA
  • LilyGO TTGO T-SIM7000G ESP32-WROVER-B 18650 Solar
• Enclosure: Plastic, Sealable With Latches And Perimeter Gasket, Perforated Mounting Plate Inside, M16 Glands For Cables And Antenna Connectors
• Bracket: articulated, with panel tilt lock, for wall or pole mounting
• Dimensions:
  • Solar Panel: 233 × 152 × 6 mm
  • Box: 190 × 109 × 74 mm
  • Bracket Height: 98 mm
• Weight: 970 g (entire package)
• Fasteners: M4×8×7 flat head screws (SUS304 stainless steel), M5×10 self-tapping screws, 6.5 × 1.6 mm O-ring

Package contents:

• 1× 5.4 W solar panel with cable and JST 2.0 connector
• 1× waterproof box with internal mounting plate
• 1× articulated solar panel bracket
• 1× set of M16 cable glands
• 1× fastening material set (screws, O-rings)

Note:

• The kit does not include a development board or a battery. The board must have a solar input 2.0; otherwise, the panel cannot be connected directly.
• The pole mount (Holding Ring) and M16 to SMA adapters for external antenna routing are separate accessories.
• For year-round operation, face the panel south and tilt it approximately 45° to prevent snow and leaves from accumulating.
• The specified panel values apply under Standard Test Conditions (STC). Actual charging power is lower and depends on the weather, season and panel orientation.
• This product is not a standalone functional unit and may require professional installation.
• Product images are for illustrative purposes only and may sometimes differ from the actual appearance of the item. However, this does not change their basic properties.