Measuring cable BNC (m) – SMA (m), RG223, 6 GHz

Product detailed description

The RG223 coaxial measurement cable with BNC male and SMA male connectors is used to connect instruments with a BNC input to modules, antennas and instruments with an SMA connector in the DC–6 GHz range. It typically connects an oscilloscope, counter, generator or spectrum analyser with a BNC connector to an RF module, NanoVNA or antenna with an SMA connector without the need for further adapters. The cable with double silver-plated braiding features low attenuation and excellent shielding; the SMA connector is made of gold-plated brass and the cable transitions are reinforced with heat-shrink tubing.

Specifications:

• Model: SMA-J – BNC-J, RG223
• Connectors:
  • BNC male (bayonet, centre pin)
  • SMA male (internal thread 1/4"-36 UNS-2B, centre pin)
• Impedance: 50 Ω
• Frequency range: DC–6 GHz
• Cable VSWR: ≤ 1.20 (DC–6 GHz)
• Cable attenuation:
  • 100 MHz: 0.125 dB/m
  • 400 MHz: 0.256 dB/m
  • 1 GHz: 0.42 dB/m
  • 3 GHz: 0.78 dB/m
  • 5 GHz: 1.05 dB/m
• Electrical properties of the cable:
  • Capacitance: 95 pF/m
  • Velocity of propagation: 70%
  • Max. operating voltage: 1400 V
• Cable construction:
  • Inner conductor: silver-plated copper, Ø 0.91 mm
  • Insulation: PTFE, Ø 2.98 mm
  • Shielding: double silver-plated copper braid
  • Jacket: PVC, turquoise, Ø 5.2 mm
• Variants:
  • 50 cm
  • 100 cm
• Suitable for:
  • NanoVNA 2.8" vector network analyser
  • HTOOL SA8 Spectrum Analyzer and Signal Generator
• Related:
  • SMA (m) – SMA (m) test cable, RG223, 6 GHz

Package contents:

• 1× RG223 BNC male – SMA male measurement cable (length according to selected variant)

Note:

• This product is not a standalone functional unit and may require professional installation.
• Product images are for illustrative purposes only and may sometimes differ from the actual appearance of the item. However, this does not change their basic properties.